Flojak 100- Foot Hand Well Pump Kit
The FloJak F-100 is a completely self contained 100-foot, hand operated well-pump kit-in-a-box, designed for static water levels of 80-90 feet or less. The design is a narrow profile...about 2", so that it can drop into almost any 4 inch or larger well casing by itself, or right beside the existing submersable pump. The pump is secured to the top rim of the well casing with a heavy duty steel hanger bracket that clamps onto the casing, or a well-seal for more permanent applications. This bracket is versatile and may also be hung over a 2 x 4, or bolted to a post or wall for creek, lake or other non-traditional applications.
The open well casing may be covered with our canvas well bonnet (included) to help keep things out of the well, or you may opt for a more permanent solution such as a well seal with a hole for 1.24 schedule 40 PVC, or a wooden cap that sits under the bracket. This system uses custom made, high resin, PVC pipe in 5 foot lengths so that the shipping carton is small and transportable in your car, and so that the pump can be assembled to the ideal length, within 5 feet. Take a look at the video showing how FloJak is engineered to assemble in 30-40 minutes.
At a minimum, you will need a pump kit long enough to drop 20 feet below the static water level in your well. We recommend that you go as deep as possible however to protect against dTo see more on this, watch a short video tour of FloJak. If you need more depth to reach static, or if you want to go well beyond static to create available water reserves in the well, you may order additional pipe kits (E-50) which come with everything needed to extend your FloJak by 50 feet at a time.
While the F-100 is a 100 foot kit, it may be easily assembled to any length you desire, longer or shorter, and is warranted to lift water 150 feet from static water level. The longer you make it, the more help you will need for installation. Any system producing over 40 feet of lift (above or below the ground) will need an accessory lever arm pump handle like the MiniJak, to reduce the work required to pump.
Every "below the water level" component is made from stainless steel or food grade polymers. The shelf life is 25 years, and FloJak comes with a 2 year warranty.
FloJak can deliver 7-10 GPM (gallons per minute), and is capable of lifting water 150 feet. You may pump right into a storage or carrying container, uphill through a hose or pipe, or even pump pressurized water into your home through the existing well plumbing or a high pressure water hose (GatorHyde WH-50) connected to any two-way outdoor faucet. This is a convenience that can provide water at the sink, tub or for flushing!
High volume, International orders, or shipments to Alaska or Hawaii must be quoted and ordered via phone. Toll Free 855-4FloJak, M-F, 8-4:30 Central.